The MP 3100 HV features two stand-by modes: ECO Standby with reduced
stand-by current drain, and Comfort Standby with additional functions, but
slightly higher current drain. You can select your preferred stand-by mode in
this menu point:
On (ECO standby):
Active functions in ECO standby mode:
Power-on at the device itself.
Automatic power-down after ninety minutes without signal (only possible
with certain sources).
Off (Comfort standby):
The following expanded functions are available:
Unit can be switched on using the app.
Can be switched on using the FD100 radio remote control handset
(the FD100 is an optional accessory)
The automatic power-down function is disabled in Comfort standby mode.
All network settings can be carried out at this menu point. For a detailed
description on setting up a LAN or WLAN connection please also refer to the
section entitled “Network configuration” on page 51.
At this point you can enter the access data for the music streaming services
(TIDAL etc.) supported by the MP 3100 HV.
Calling up this menu point by pressing the button displays a list of the
supported music services.
Select the service you wish to use, then confirm your choice with the
button.
Now use the alpha-numeric keypad of the FD100 to enter the access data
which you have received from your service provider in the lines “User” and
“Passphrase”.
Use the button to switch between numeric and alpha-numeric input, and
between capitals and lower-case letters.
Press the button to erase any letter.
In each case confirm your input of user name and password by pressing the
button.
To conclude the procedure and save the data, select the menu entry “Store
and exit?” and confirm by pressing the button.
If access data for the selected music service has already been stored, the new
data will overwrite them. To use the new access data you must first perform a
“Logout” for the service in question, then switch the MP 3100 HV off and on
again.
The music streaming services supported by the MP 3100 HV require a
subscription to the appropriate service provider.
Bandwidth limit
menu item
This menu point can be used to adjust the link speed of the Internet
connection. The bitrate of the Internet radio stations and streaming services is
adjusted automatically to match your chosen setting. If you select “no limit” for
bandwidth limit, the highest available quality is always selected automatically.
If you do not know the exact bandwidth of the internet connection, we
recommend that you select the setting at which no drop-outs occur during
playback.
To Next Page
Loading...
Need help?
General