T+A PA 2000 R - Page 55

55
LAN
Interface for diagnosis work and computer-controlled operation of device
functions. (Home-Automations-Systems e. g. CRESTRON, AMX).
R2LINK
Control output for  devices with R2LINK inputs.

One of the two sockets can be used as a trigger input. An adapter lead is
required for this; please refer to the  accessory range.
(see chapter 'Surround operation with the PA 2000 R’)


Pin assignment
1 Reserved
2 Reserved
3 Reserved
4 Reserved
5 Reserved
6 GND (ground)
7 Reserved
8 Trigger (+5…+20V)
RJ 45 connector
Mains input
This socket is for mains connection.
For correct connection refer to the sections 'Installation and Wiring' and
'Safety Notes'.