36
RC-IN (E 2000)
Input socket for the E 2000 remote control receiver.
R
LINK
Control output for devices with R
LINK
inputs.
RC-OUT
Control outputs for older devices without R
LINK
inputs.
CTRL OUT
(only P 1230 R)
Control output for power amplifiers without an
R
LINK
input.
Mains input
This socket is for mains connection and contains the main
fuse. The fuse should only be replaced with another fuse
rated at the values printed on the amplifier.
For correct connection refer to the sections
'INSTALLATION AND WIRING' and 'SAFETY NOTES'.
To Next Page
Loading...
