Need help?Do you have a question about the T+A DD 1230 R and is the answer not in the manual?
General| Type | Integrated Amplifier |
|---|---|
| Signal-to-Noise Ratio | > 100 dB |
| Input Impedance | 47 kOhm |
| Input Sensitivity | 250 mV |
| Inputs | 1 x Phono |
| Outputs | 1 x Pre-Out |
ON and MODE buttons for power status and surround mode selection.
DIGITAL, PRO LOGIC II, and DTS modes for signal detection.
Overview of remote control buttons and their general functions.
Selecting listening modes (Surround, Stereo, Mono) and sound fields.
Adjusting ProLogic II, speaker balance, tone, loudness, and dynamic range.
Overview of the system configuration menu structure and its components.
Setting sizes for main, center, rear speakers and subwoofer presence.
Entering speaker distances for timing compensation.
Setting individual channel volume levels for a balanced sound impression.
Compensating for room acoustics and speaker placement via tone controls.
Assigning names, signal routes, and input/output sockets for AV devices.
Step-by-step guide for connecting and configuring a DVD player for surround.
Warnings regarding power supply, connections, and safe handling of the unit.
Guidelines for ventilation, liquid protection, and proper operational environment.
Resolving problems with power, button response, and remote control operation.
Fixing issues with sound output, picture quality, display, and format compatibility.
Detailed specifications for inputs, converters, filters, processor, and power output.
To Next Page
