T+A DD 1230 R - Technical Specifications; Decoder and Output Stage Specifications

51
Specification
DD 1230 R
DD 1530 R
Decoder
Analogue inputs:
500mV / 20 kΩ
Digital inputs
(3 x co-axial, 2 x optical):
5 x SP/DIF, 44.1 kHz, 48 kHz and 96 kHz
A/D converter:
2 channel, 24 bit, 48 kHz
D/A converter:
6 channel, 24 bit, 192 kHz
Analogue filter:
3rd order, 60 kHz, Bessel
Decoder type:
56-bit signal processors
Frequency response:
1 Hz . . . 22 kHz
Total harmonic distortion:
< 0.004 %
Signal : noise ratio (A-weighted):
> 106 dB
Signal : noise ratio (unweighted):
> 103 dB
Effective system dynamic range:
> 94 dB
Channel separation:
> 100 dB
Volume control:
analogue, 1,5 dB increments
Tone controls:
fully digital, channel-separate
Operating modes:
Dolby Digital, Dolby ProLogic II, dts Digital Surround
Sound fields: Stadium, Club, Hall, Theatre, Church, Disco
Output stage
into 8
Ω
ΩΩ
Ω
:
80 Watts 150 Watts
Nominal power per channel *
into 4
Ω
ΩΩ
Ω
:
100 Watts 200 Watts
into 8
Ω
ΩΩ
Ω
:
160 Watts 200 Watts
Peak power per channel *
into 4
Ω
ΩΩ
Ω
:
200 Watts 250 Watts
* Power specification: both channels driven simultaneously
U
mains
= 240 V (230 V version) or 120 V (115 V version)
Power bandwidth:
1 Hz . . 300 kHz
Frequency response +0 -3dB:
1 Hz . . 400 kHz
Slew rate:
60 V/µs
Damping factor:
> 500
Signal : noise ratio (A-weighted):
> 110 dB
Total harmonic distortion:
< 0.002 %
General
Mains power:
see print on the back panel
Power consumption:
300 VA 600 VA
Standard accessories:
Mains lead, SCART lead, TASI lead,
subwoofer lead,
R
LINK
lead,
operating instructions, guarantee certificate
Optional accessories and
expansion units:
Interconnect and loudspeaker cables, connectors,
rack systems, matching design
We reserve the right to alter specifications.