TRACE ELLIOT Transit B - Equalisation Switch; Pre and Post Compression Switch; Tuner Display; Drive Switch

5
(9) EQUALISATION Switch
Allows user to bypass the on-board EQ.
(10) PRE and POST Compression Switch and LED
Allows user to choose whether to add compression to the signal before the EQ or aer.
(11)TUNER Display
Activates when the MUTE/TUNE switch (7) is pressed. e note being played is displayed and the LEDs on
the above knobs indicate whether the note is too at or sharp. When the center red LED shines alone, the note
is in tune.
(12)DRIVE Switch
Activates the Drive circuit.
(13)PASSIVE/ACTIVE INPUT Switch and LED
Allows user to select the optimum setting for an instrument with either a passive or active pickup.
(14)PRE-SHAPE
Activates the circuit for the classic Trace Elliot® ‘Mid Pre-Shape’ that all users of Trace Elliot
graphic style ampliers will recognise immediately. The actual effect of this circuit is to boost the low and
high frequencies (55Hz and 2kHz to 5kHz respectively) and to cut the mid frequencies (centred around
400Hz), giving an instant, clearly dened, punchy sound.