Receiver upgrades:
The Classic is sold as a one or two dog unit. If your receiver was
purchased to monitor a single frequency, you can return the
receiver to Tracker Radio and have a second crystal installed to
monitor a second collar. Charges are assessed for upgrading
and shipping.
CLASSIC RECEIVER
The Tracker CLASSIC receiver is a directional receiver marketed
for a variety of applications including hunting dogs, falconry, pet
tracking, remote control airplanes and model rockets. The anten-
nas fold alongside the body of the receiver to create the most
easily transportable receiver/antenna combination available any-
where in the world.
Below is a review of the important features of the Classic receiver.
Integrated Antenna:
A key feature of the Tracker CLASSIC receiver is the integrated fold-
ing antenna. Tracker antennas feature steel hinges connecting the
antenna elements to the receiver. You will notice that the antennas
are made of virtually unbreakable circuit board material. The
patented design allows the mechanical length of the antenna to be
significantly shorter than the required electrical length.
Operating the receiver:
To use the receiver, first unfold the antennas before activating
the receiver. The receiving antennas are situated on the front of
the receiver and, when fully extended, are perpendicular to the
axis of the receiver. The reflecting antennas are located to the
back and, when fully extended, form a 7
5 deg
ree angle to the
a
xis of the receiver
. All four elements need to be extended
when tracking.
2
To Next Page
Loading...