Need help?Do you have a question about the trackit VT10 and is the answer not in the manual?
Essential guidelines for wiring, grounding, and preparation before installing the device.
Specifies the voltage range, fusing, and circuit requirements for powering the main unit.
How to connect the ignition switch input, emphasizing reliable sources and avoiding backfeeds.
Factors for positioning the main unit to avoid tampering, shocks, and environmental damage.
Best practices for mounting the GPS antenna for optimal signal reception.
Guidelines for optimal GSM antenna placement to ensure good reception.
Details on connecting various inputs and outputs for device functionality and control.
Advises customers on trickle charging to prevent battery drain during storage.
Lists the key capabilities and features of the VT10 GPS tracker.
Important safety recommendations for installation, operation, and device handling.
Comprehensive technical specifications including power, dimensions, operating conditions, and interfaces.
Lists the components included in the VT10 packaging box.
Visual identification of the VT10 unit's front, side, back, and functional components.
Explains LED functions, buttons, SIM holder, antenna connectors, and PINs connector details.
Step-by-step guide for SIM card installation, antenna connection, and initial testing.
Diagram and explanation for connecting the SOS button to Input 1.
How to detect car door or trunk status using Inputs 2 or 3.
Connecting switch sensors to Inputs 2 or 3 for SMS alarm notification.
Using Input 4 for detecting the vehicle's ignition status.
Examples of using Analog Inputs, such as fuel level sensing, with voltage requirements.
Wiring a relay to an output for engine immobilization based on voltage and current requirements.
How to use an output to trigger a car alarm when the output is open.
Information on how to contact technical support for product issues.
Crucial steps before vehicle handover, including setup confirmation and customer details.
To Next Page
General