Safety Information TRACKMASTER
• Operator should be aware of elevation malfunction and be prepared to assist patient
and stop treadmill if necessary.
• Operator should always be aware of improper treadmill response to commands.
• Check treadmill before use. This includes:
– Check power cord connection.
– Check emergency stop button for proper operation.
– Check interface cable to ensure it is secure.
– Verify ECG communication is correct.
• Verify operator knows how to stop the treadmill in the event of malfunction or
emergency.
• Make operator aware if treadmill is not responding properly to commands.
• Keep all cords clear of operator to avoid trip hazards.
• Operator should not wear loose fitting nylon material when exercising on treadmill to
aviod generating ESD.
• Operator needs to be aware of and note any components of the treadmill that are
loose.
• Do not allow moisture or oils to accumulate on treadmill, creating a slip hazard.
3-2 TMX425 Series Owner’s Manual February 1, 2004
To Next Page
Loading...
