Trackmaster TMX425 - Installation and Placement; Power Requirements

5
A
ssembly, Location, and Power
R
equirements
TRACKMASTER
®
treadmills are shipped fully assembled unless otherwise specified.
After you have unpacked the treadmill, move it to the exercise area by rolling it on its
front wheels. If your treadmill is shipped partially disassembled, refer to The Packing List/
Assembly Sheets for assembly.
CAUTION If you are moving the treadmill over a rough surface, such as pavement, use a dolly under
the front of the treadmill to prevent damage to the wheels.
Place the treadmill on a level, stable surface—short-pile industrial carpeting is acceptable.
CAUTION Do not place the treadmill on thick or long-pile carpeting. Such carpeting could cause
instability or static build-up, and carpet fibers could get caught in the belt and damage the
unit.
Provide adequate clearance around the treadmill, away from obtrusive objects such as
weight machines. Obstructions can cause injury to the user or damage to the treadmill.
Keep the treadmill away from sources of moisture, such as spas or fountains. Moisture can
cause the electronic circuitry to malfunction.
February 1, 2004 TMX425 Series Owner’s Manual 5-1