Assembly, Location, and Power Requirements TRACKMASTER
5-2 TMX425 Series Owner’s Manual February 1, 2004
Your TRACKMASTER
®
treadmill operates on a 200-240VAC, 15-amp (13 amp-Europe)
service (115VAC, 20-amp optional). The treadmill requires an approved outlet (see Chapter
4, “Grounding Instructions”) that is properly grounded, includes a 15-amp (13 amp-
Europe) circuit breaker (20 amp for the optional 115VAC power supply, with neutral line
dedicated on 115VAC), and dedicated to the exclusive use of the treadmill.
Note: In applications using the 115VAC 20-amp Treadmill, a high magnetic type
circuit breaker in your service box is required.
No other equipment may be used on the treadmill circuit. Do not use extension cords.
Using an ungrounded, shared, or otherwise improper circuit will void the machine's
warranty and may result in major damage to your treadmill's electronic circuits. Using a
shared circuit can also cause the treadmill to unexpectedly shut off, resulting in injury to
the user.
Ensure that power cords do not cross traffic areas. Exposed power cords can cause a fall,
resulting in injury.
Before plugging the power cord into its power outlet, ensure that the treadmill master
power switch is in the OFF position . A power surge through the treadmill electronics
could trip the treadmill’s circuit breakers.
To Next Page
Loading...
