Troubleshooting TRACKMASTER
Treadmill Will Not Start
1. Make sure emergency stop button is not engaged.
2. Make sure the treadmill’s main power light is on (green).
3. Make sure the ECG cable from the stress system to the treadmill is in place and secure.
4. Use the RS232 test plug to check the functionality of the treadmill (see Chapter 6). If
the treadmill tests OK, then the problem is probably in the ECG cable on the ECG
computer.
Running Belt Slips When In Use
Over a period of time, the treadmill running belt will stretch and allow slippage when used
by a heavy person. See “Belt Tension Adjustment” on page 7-4 to adjust.
Running Belt Is Off-Center
Occasionally the treadmill running belt will become off-center. See “Running Belt
Adjustment”
on page 7-3 to adjust.
8-6 TMX425 Series Owner’s Manual February 1, 2004
To Next Page
Loading...