4
Grounding Instructions
TRACKMASTER
®
treadmills must be grounded to reduce the risk of electric shock. If a
malfunction occurs, grounding provides a path of least resistance for an electric current.
Ungrounded connections may cause electrical shock.
This product is equipped with a three-wire grounding-type plug. The plug will fit into
only a grounding-type outlet. This is a safety feature—do not disable the plug’s third
(grounding) pin with an adapter! Contact a qualified electrician if you are either (1)
unable to insert the plug into your outlet, or (2) uncertain that the outlet is grounded and
meets local codes.
The treadmill is designed to operate on a 200-240VAC/15-amp (13 amp-Europe) service
(unless you ordered the 115VAC/20-amp power supply option). Make sure that the
treadmill is connected to an outlet that looks like the following illustration. Never use an
adapter or extension cord with this product. If you have any questions or experience any
problems, contact your distributor.
115 VAC
NEMA 5-20R
200-240 VAC
NEMA 6-15R
February 1, 2004 TMX425 Series Owner’s Manual 4-1
To Next Page
Loading...
