CAMON TC07 Turf Cuer
TC07 Turf Cuer Page 11
6.0 Safety Instrucons Starng and Operang
6.1 To Start the Engine
Using the dipsck provided,
check the engine oil level. Top
up with SAE 10W/30 oil, API SJ
or equivalent, if the dipsck is
clear of oil.
Check the fuel level. Rell as
necessary and as determined
by the fuel tank type – see
diagram.
Switch the engine ignion
switch to the ON posion.
Turn the fuel tap located on the
engine carburetor to the ON
posion. If the engine is cold or
has not been operated recently
set the choke lever on the
carburetor to the ON posion.
Pull the engine recoil handle slowly unl it engages then pull hard and fast to start
the engine.
Aer the start, guide the cord back into its posion. Do not let it snap back.
Once the engine has started, if the choke lever has been used, return this to its OFF
posion aer the engine has run for a few seconds.