Tracmaster CAMON TC07 - 7 Maintenance; Schedule; Basic Maintenance; Engine

CAMON TC07 Turf Cuer
Page 14 TC07 Turf Cuer
7.0 Maintenance
IMPORTANT! BEFORE UNDERTAKING ANY MAINTENANCE ENSURE
THAT THE ENGINE IS OFF AND THE FUEL TAP IS OFF.
7.1 Schedule
Operaon Daily
Every
Week
Every
Month
Engine
Check engine oil level SAE 10W/30 API SJ or equivalent
See separate engine manual
X X
Machine
Check condion of blade
X
Check belt condion
X
Check operang lever and cable
X
Check protecon cover condion
X
Check bearings
X
Lubricate wheel bearings
X
Tighten all nuts and bolts
X
7.2 Basic Maintenance
Check that all guards are ed securely.
Ensure the cable connecng the drive lever to the engine is securely fastened at
both ends and shows no sign of wear.
Ensure the wheels are held securely and the xed pin that holds the wheels onto
the axles is in place.
Check that the wheels rotate smoothly and without hindrance.
7.3 Engine
7.3.1 Check Engine Oil Level
This is to be checked prior to each use and every 8 hours during operaon.
Check only when the engine is o and in a horizontal posion.
Clean the oil ller plug and its surrounding parts.
Remove the oil ller plug. Clean the dipsck with a clean cloth and put the
oil ller plug all the way back into the engine. Remove the oil ller plug and
check the oil level.
Rell the oil if indicator shows more is required. For the Honda GX160 the
recommended oil is SAE 10W/30 API SJ or equivalent.
!