15
TRAEGERGRILLS.COM
Press the “Up” button until the temperature display reads
450°F (250°C).
Press the IGNITE button. Let the grill run at 450°F
(250°C) for 30 minutes with the lid closed to complete
the seasoning process.
NOTE: To change between Celsius (C) and Fahrenheit (F),
press and hold the “Up” and “Down” buttons simultaneously.
10
9
CONTROLLER SHUT-DOWN CYCLE
Always allow the shut-down cycle to completely finish
before powering o your grill at the Main Power switch.
The shut-down cycle ensures the fire is suppressed
and the grill ignites properly on the next use.
DANGER! Turning o the Main Power switch
will cut power to the grill components only. When
servicing the control or any other parts, ensure
that the power supply is disconnected to avoid
an electrical shock hazard.
The controller for this grill comes with an automatic
shut-down cycle. When finished cooking on your grill,
press and hold the Center button for 3 seconds. The
display will flash “OFF” for several seconds, then scroll
“COOL Dn” followed by the actual temperature until the
grill cools down to a safe temperature.
While the controller is flashing “OFF,” you can cancel
the shut-down cycle by pressing and holding the Center
button for two seconds.
11
To Next Page
Loading...
Need help?
General
