EasyManua.ls Logo

Traeger TFB52QCE - Using Your Grill; Connecting Power and Starting Grill; Setting Temperature and Preheat; General Operating Notes

Traeger TFB52QCE
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
USING YOUR GRILL
YOU WILL NEED TO BEGIN WITH THESE STEPS EVERY TIME YOU USE YOUR GRILL.
Turn the temperature dial to your desired temperature.
Afer 2 minutes pellets will begin to ignite and whitish-
gray smoke will come out of the grill. For best results allow
the grill to preheat for 10 minutes before placing food in
the grill.
Probe 1
Probe 2
1
PLUG APPEARANCE MAY VARY BY REGION.
Plug power cord into an appropriate grounded/earthed
electrical outlet and flip Main Power switch to ON (I).
Probe
Selector
Probe 1
Probe 2
2
NOTES:
Always run your grill through the full shut down
cycle afer each cooking task. Turn the temperature
dial to SHUT DOWN CYCLE to initiate the shut down
cycle.
We recommend you clean the grease drip tray
frequently to reduce the possibility of a grease fire.
Please see “Maintaining Your Grill” on page 16 for
more details.
WARNING!
When operating this grill, maintain a minimum
clearance of 18 inches (45.7 cm) from grill to
combustibles.
Use ONLY TRAEGER® BRAND HARDWOOD
PELLETS, which are specifically made to work in
our grills. Never use heating fuel pellets in the grill.
Allow the grill to preheat for about 10 minutes with the
door closed before placing food in the grill.
3
5256 Homestead OM v11.indd 12 10/19/18 1:36 PM

Related product manuals