EasyManua.ls Logo

TrailMaster CHALLENGER200E-X - Control Functions; Main Switch Functions

Default Icon
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
CONTROL FUNCTIONS
Main Switch
Functions of respective switch position are as
follows:
OFF:
All electrical circuits are switch off. The key can
be removed in this position.
ON:
Allelectricalcircuitsaresuppliedwithpower,and
the headlights and taillights comes on when the
light switch ison.
Ignition:
The electric starter is engaged by turning and
holding the key in this position. Release the key
when the engine starts.
CAUTION:
-
Donotoperatetheelectricstartercontinuouslyformorethan5seconds,orstarterdamagecould
occur. Wait at least 5 seconds between each operation of the electric starter to let itcool.
-
Donotturn thekeytothe“START”positionwiththeenginerunning,ordamagetotheelectric starter
canresult
-
See Starting instructions prior to starting theengine.

Related product manuals