EasyManua.ls Logo

TrailMaster CHALLENGER200E-X - Vehicle Controls: Shifter, Fuel, Seatbelts; Seat Belt Usage and Adjustment

Default Icon
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
1.
Drive selector (Forward, Neutral,
Reverse)
Drive Select Lever
Thedriveselectleverisusedtoshiftyourvehicle into
Forward, Neutral and Reverse position. (D,N,R).
Always STOP the vehicle completely before
select into a differentdrive.
NOTE:Sometimesitmaybedifficulttoselectinto
the drive that is because the gears might be
locked up in the transmission. Try to move the
vehiclewithyourweighttounlockthegears.
1. Fuel tank cap
Fuel tank cap
The Fuel tank is located
right side
the vehicle .
Remove the fuel tank cap by turning it
counterclockwise.
Warning: Only use unleaded grade gasoline
1.
2.
Buckle
Latch Plate
Seat Belts
This vehicle is equipped with three‐point seat
belts for both the operator and passenger.
Always wear the seat belt while riding the
vehicle.
1. Hold the latch plate as you pull the belt
acrossyourlapandchest.Makesurethebelt is
not twisted and is not caught on any portion
of the vehicle, your clothing, or any
equipment you arecarrying.
2. Push the latch plate into the buckle until it
clicks.Pulluponthelatchplatetomakesure it
issecure.

Related product manuals