67
Install rubber hubcap over axle nut.
NOTE: Repeat Steps 62-67 for the driver’s
side rear wheel.
68
Remove bolts from the passenger’s
side rear fender mounts with a 10mm
wrench.
69
Install rear passenger fender.
NOTE: Rear fender mounting brack-
ets have the shorter reach arm.
70
Tighten the bolts securely using a
10mm wrench.
NOTE: Repeat Steps 68-70 for the driver’s
side rear fender.
71
Lift front of go-kart and support with
jack stands.
72
Remove fender mount bolts on pas-
senger side located behind the front
shock with a 10mm wrench.
GOKARTMASTERS.COM
GOKARTMASTERS.COM
GOKARTMASTERS.COM
GOKARTMASTERS.COM
GOKARTMASTERS.COM
GOKARTMASTERS.COM
To Next Page
Loading...
