USER GUIDE
4
INTRODUCTION
Thank you for selecting the new CMEXpert II instrument,
from Tramex. It has 3 measurement modes.
1. Non-invasive, Non-destructive test (NDT) mode
The CMEXpert II utilises “state of the art”
electronic technology to provide you with an
accurate and easy to use non-invasive instrument
for non-destructive testing (NDT) of Moisture
Content (MC%) in concrete and comparative
readings in gypsum and other oor screeds.
2. Hygro-i probe mode
This enables the CMEXpert II to measure
relative humidity (RH), temperature, dew point
temperature and mixing ratio of the environment
or in a structural material. A structural material
such as a concrete slab can be tested using the in-
situ method (ASTM F2170) or RH Hood methods
(British Standards BS 8201, 8203, 5325).
3. PIN Probe mode
This enables the CMEXpert II to measure the
percentage moisture content (MC%) of wood. The
CMEXpert II can also be used for wood-based
products.
To Next Page
Loading...
