TRAMEX CONCRETE MOISTURE ENCOUNTER X5 User Manual

CONCRETE MOISTURE ENCOUNTER X5 USER GUIDE
9
INSTRUMENT FEATURES
Your Concrete Moisture Encounter X5 employs
advanced digital technology to enable the incorporation
of the many features listed below.
● 4 modes of measurement: Non-destructive
moisture measurement, ambient hygrometer and
optional external in-situ hygrometer and wood pin
probe.
● 8 simple membrane keypad controls.
● Moisture readings and scale are displayed on a
large, clear easy-to-read clear digital display:
2.3" x 1.4" (58mm x 35mm).
● 5 NDT Scales: Concrete MC, CM Concrete
(Carbide Method equivalent for concrete), CM
Anhydrite/Gypsum, Gypsum Ref 0-12 and a
Reference scale. These are selected using the
and keys.
● The built-in Hygrometer probe provides Relative
Humidity (RH) readings, temperature, dew point
temperature and Humidity Ratio.
● Wood pin probe mode is automatically selected
when the probe is plugged into the Concrete
Moisture Encounter X5.
● When the external Relative Humidity (RH) Hygro-i2
probe is connected to the Concrete Moisture
Encounter X5, the instrument automatically
switches to RH mode. Ambient or In-Situ Relative
Humidity readings, probe temperature, dew point
temperature and Humidity Ratio are automatically
displayed (Hygrometer Mode).

TRAMEX CONCRETE MOISTURE ENCOUNTER X5 Specifications

General

Brand	TRAMEX
Model	CONCRETE MOISTURE ENCOUNTER X5
Category	Measuring Instruments
Language	English