8
MOISTURE ENCOUNTER 5 USER GUIDE
- Back to Top -
• Automatic supply timeout (5 minutes) conserves
battery life.
• Bluetooth connectivity.
• Supply timeout is automatically extended if a
change in meter reading is detected or if any
button is pressed.
• 10 second bleep warning on instrument sounder
prior to end of supply timeout period.
• Last used scale is memorized at supply timeout
and automatically selected next time ON/OFF
button is pressed. If Bluetooth was selected prior
to the Moisture Encounter ME5 automatically
powering off it will be restored next time ON/OFF
is selected.
• LEDs illuminate for selected scale.
• HOLD/AUDIO button freezes moving coil meter
and LED will flash. HOLD facilitates readings taken
out-of-sight.
• If HOLD/AUDIO was selected prior to supply
timeout, the frozen meter reading is digitally
memorized and restored next time ON/OFF is
selected.
• If the battery voltage is getting low, the five
LEDs flash sequentially for a short period. The
instrument will continue to operate for some
time but it is recommended that the batteries be
changed as soon as convenient.
To Next Page
Loading...
Need help?
General
