8 WSHP-SVX02C-EN
Dimensions and Clearances
WARNING
Improper Unit Lift!
Test lift unit approximately 24 inches to verify proper
center of gravity lift point. To avoid dropping of unit,
reposition lifting point if unit is not level. Failure to
properly lift unit could result in death or serious injury
or possible equipment or property-only damage.
Table 1. Unit weights
Size
Approximate Shipping
Weight with pallet (lb)
Approximate Weight
w/o pallet (lb)”
EXWE060 326 296
EXWE120 653 613
EXWE240 1222 1156
Unit Location and Clearances
Locate the unit in an indoor area. The ambient
temperature surrounding the unit must not be less than
45°F. Do not locate the unit in areas subject to freezing.
Attention should be given to service clearance and
technician safety. The unit access panels may be easily
removed. There must be enough space for service
personnel to perform maintenance or repair. Provide
sufficient room to make water, and electrical
connection(s). Local and national codes should be
followed in providing electrical power connections. See
Figure 1 for mechanical clearances.
Figure 1.
TOP VIEW
EXWE060
EXWE120
EXWE240
To Next Page
Loading...
