EasyManua.ls Logo

Trane Technologies TAMXB0B30V31DA User Manual

Default Icon
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SSAAFFEETTYY WWAARRNNIINNGG
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and air-conditioning
equipment can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered equipment by an unqualified person
could result in death or serious injury. When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that
are attached to the equipment.
August 2022
1188--GGJJ8899DD11--11EE--EENN
Variable Speed Air Handlers
Convertible 2 5 Ton
TAMXB0A24V21DA
TAMXB0B30V31DA
TAMXB0C36V31DA
TAMXB0C42V41DA
TAMXB0C48V41DA
TAMXB0C60V51DA
TM
The Diagnostics Mobile App is available by scanning a
QR code located inside this unit or by searching for the
Link Diagnostics App in your App Store.
NNoottee:: “Graphics in this document are for representation only. Actual model
may differ in appearance.”
NNoottee:: For use with BAYEA series heaters ONLY.
NNoottee:: This unit can be used in Link Communicating mode or 24 volt mode.
NNoottee:: Need to use Diagnostics App to configure blower delays and
accessories etc., in 24 volt mode.
Installer’s Guide
Question and Answer IconNeed help?

Do you have a question about the Trane Technologies TAMXB0B30V31DA and is the answer not in the manual?

Trane Technologies TAMXB0B30V31DA Specifications

General IconGeneral
BrandTrane Technologies
ModelTAMXB0B30V31DA
CategoryAir Handlers
LanguageEnglish

Summary

Variable Speed Air Handler Overview

Safety Warnings and Precautions

General Safety Warnings

Covers hazards like voltage, refrigerant, sharp edges, and chemical exposure.

Unit Installation Preparation Steps

Unit Placement Procedures

Vertical Installation Guide

Horizontal Installation Guide

Ductwork Connection Procedures

Refrigerant Line Installation

Refrigerant System Diagram

Diagram illustrating the layout of refrigerant system components.

Refrigerant Line Brazing Process

Low Voltage Electrical Connections

Low Voltage Wiring Guide

Steps for making low voltage connections to the air handler control board.

Low Voltage Wiring and Sensor Installation

Control Panel Reinstallation Steps

High Voltage Electrical Connections

System Start-Up Procedure

System Charge Adjustment Guidelines

System Sequence of Operation

Advanced Operation and Diagnostics

Final System Checkout

Related product manuals