TK 62061-18-IM-EN
33
1. First fit the discharge fitting.
2. Assemble the oil return fitting in the separator.
3. Fit the defrost fitting.
4. Mount the filter with the liquid sight glass in the liquid line.
5. Remove the plug from the liquid sight glass, and fitan O-ring.
6. Assemble the liquid line fitting.
MMuullttii--TTeemmppeerraattuurree ((SSppeeccttrruumm OOnnllyy))
7. Mount the compressor’s suction line fitting.
8. Mount the evaporator’s suction line fitting.
CCoonnnneeccttiinngg tthhee HHoosseess ttoo tthhee CCoonnddeennsseerr UUnniitt
To Next Page
