10
Remote Control Operation
䘹఼ᣝ䬂ⱘৡ⿄ঞ⫼
MS-SVU42A-EN
Remote control
ƽ
In the cool or dry mode, pressing the button
once will activate the " blow " function ( see
BLOW Button
BLOW
be active. Press the button a second time
and "DRY" will be concealed and the blow
function is canceled. If operating the ON/
OFF button and changing the mode from
COOL to DRY, the status of BLOW will
stay in the original position. This function is
not available under the AUTO, FAN or
HEAT mode.
ƽ
In Cool or Heat mode, use this button to
activate the Turbo function. When the signal
TURBO Button
TURBO
is displayed, the unit will run at the highest
fan speed to rapidly cool or heat the room to
the preset temperature as quickly as possible.
Turbo mode is automatically cancelled if the
ƽ
When unit is powered on, Light On is
defaulted. Use this button to switch
LIGHT Button
LIGHT
between Light On and Light Off.
+ Button
+
ƽ
Use this button to decrease the temperature
setting. Depress the button continuously
- Button
-
for two seconds to decrease the setting
rapidly. Release the button to send the
setting to the unit, and the will be
continuously dispalyed. Temperature range
ć
R
)
for Celsius degree setting is 16-30; for
Fahrenheit degree setting is 61-86.
This temperature adjustment is not available
in the AUTO mode.
Names and functions of wireless remote control
page 12 ): Press the button once and "DRY"
will be displayed and the blow function will
ƽ
Use this button to increase the
temperature setting. Depress the button
c
ontinuously for two seconds to increase
the setting rapidly. Release the button to
send the seting to the unit, and the
will be continuously displayed. Temperature
ć˄˅
for Fahrenheit degree setting is 61-86.
T
his temperature adjustment is no
available in the AUTO mode.
range for Celsius degree setting is 16-30;
with your system. Some buttons may be de-activated.
Notice: This is a general use remote controller, and not all features may be included
mode or fan speed is changed.
.
To Next Page
Loading...
Need help?
General
