Trane BAYHTFB318 Series - User Manual

SSAAFFEETTYY WWAARRNNIINNGG
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and air-conditioning
equipment can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered equipment by an unqualified person
could result in death or serious injury. When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that
are attached to the equipment.
April 2020
AACCCC--SSVVNN115500FF--EENN
Installation Guide
Accessory Electric Heat
Foundation Packaged Rooftop Units
15 to 25 Tons
BAYHTFB318*
BAYHTFC336*
BAYHTFD336*
BAYHTFC354*
BAYHTFD354*
BAYHTFC372*
BAYHTFD372*
BAYHTFB418*
BAYHTFC436*
BAYHTFD436*
BAYHTFC454*
BAYHTFD454*
BAYHTFC472*
BAYHTFD472*
BAYHTFBW18*
BAYHTFCW36*
BAYHTFDW36*
BAYHTFCW54*
BAYHTFDW54*
BAYHTFCW72*
BAYHTFDW72*
BAYHTFBK18*
BAYHTFCK36*
BAYHTFCK54*
BAYHTFDK18*
BAYHTFDK36*
BAYHTFDK54*
BAYHTFDK72*

Trane BAYHTFB318 Series Specifications

General

Voltage	208/240V
Wattage	18kW
Phase	1
Heating Capacity	18 kW
Maximum Current	75 Amps
Maximum Overcurrent Protection	100A
Cabinet Material	Steel

Summary

Warnings, Cautions, and Notices

Proper Field Wiring and Grounding

Ensures safe electrical connections by requiring qualified personnel and adherence to codes for installation.

Personal Protective Equipment (PPE)

Mandates use of appropriate PPE to prevent injury from electrical, mechanical, or chemical hazards during servicing.

Important Environmental Concerns

Discusses the environmental impact of refrigerants and advocates for responsible handling practices.

Important Responsible Refrigerant Practices

Outlines the importance of following local rules and industry standards for refrigerant management.

General Information

Unit Inspection

Inspect unit for damage or shortages upon receipt and file claims immediately if issues are found.

Inspection for Concealed Damage

Inspect internal components for concealed damage shortly after delivery and report any findings promptly.

Parts List

Lists all components included with the electric heat accessory, such as heater elements and control assemblies.

Installation

Removing Heater from Packaging

Guides on safely removing the electric heater from its packaging and securing brackets.

Heater Installation Steps

Provides detailed, step-by-step instructions for physically installing the electric heater into the unit.

Unit Wiring

Details required wiring configurations and component sizing for electric heat connection based on unit and voltage.