Trane BCVE - Page 117

BCX-SVX002A-EN
117
Table 41. BCHE coil general data (continued)
Unit Size 12 18 24 36 54 72 90 120
Nominal cfm 400 600 800 1200 1800 2400 3000 4000
Length - in.
(b)
16 20 20 32 38 50 40 50
Velocity - ft/min.
450 540 480 450 487 494 491 524
1-row coil
Minimum gpm
(c)
1 1 1 1 3.5 3.5 5.5 5.5
Maximum gpm
(d)
5.2 5.2 5.2 5.2 18.6 18.6 29.3 29.3
Dry coil weight - lb
6.5 7.4 9.5 13.0 17.0 21.4 23.4 28.3
Wet coil weight - lb
7.10 8.20 10.80 14.80 19.50 24.50 27.50 33.30
Internal volume - in
3
17.4 20.85 34.6 50.0 69.5 87.5 114.5 138.0
2-row coil
Minimum gpm
(c)
1 1 2 2 3.5 4.7 7.4 7.4
Maximum gpm
(d)
5.2 5.2 10.4 10.4 18.6 37.3 58.6 58.6
Dry coil weight - lb
8.8 10.2 13.6 18.6 24.5 32.4 36.4 44.3
Wet coil weight - lb (kg)
10 11.7 15.7 21.8 29.6 38.5 44.3 53.9
Internal volume - in
3
33.1 40 58.3 89 142 168.9 218.3 265
3-row coil - DX coil
Internal volume - in
3
44.2 53.8 81.42 124.7 193.0 243.7 301.3 367.3
4-row coil
Minimum gpm
2 2 3 3 4.7 4.7 7.4 7.4
Maximum gpm
10.6 10.6 16.0 16.0 37.3 37.3 58.6 58.6
Dry coil weight - lb
(e)
13.9 16.2 21.4 30.4 40.5 52.0 60.4 74.3
Wet coil weight - lb
(e)
16.1 19.0 25.6 36.8 50.4 64.5 75.9 93.1
Internal volume - in
3
(e)
62.7 76.4 115.5 177.0 273.8 345.7 427.5 521.0
4-row coil - DX coil
Internal volume - in3 58.9 71.8 108.5 166.3 257.3 324.9 401.8 489.7
6-row coil
Minimum gpm
(c)
2 2 3 4 4.7 4.7 7.4 7.4
Maximum gpm
(d)
10.6 10.6 16 32 37.3 37.3 58.6 58.6
Dry coil weight - lb
18.5 21.8 29.0 43.3 55.4 71.7 83.4 103.2
Wet coil weight - lb
21.8 25.8 35.1 53.7 69.5 89.6 105.8 130.7
Internal volume - in
3
91.4 112 168.8 288 390 497.7 619.4 760
6-row coil - DX coil
Internal volume - in
3
85.9 105.2 158.6 270.7 366.6 467.8 582.2 714.4
8-row coil
Minimum gpm
(c)
2 2.7 3 4 4.7 4.7 7.4 7.4
Maximum gpm (d)
10.6 21.3 16.0 32.0 37.3 37.3 58.6 58.6
Dry coil weight - lb
23.2 28.2 36.6 54.7 70.4 91.4 106.4 132.2
Wet coil weight - lb
27.5 33.7 44.6 68.1 88.7 114.8 135.7 168.3
Internal volume - in
3
120.1 151.8 222.2 372 506.0 649.8 811.3 999.5
(a)
Coil width = Length in the direction of a coil header, typically vertical.
(b)
Coil width = Length in the direction of a coil header, typically vertical.
(c)
The minimum waterflow at 1-1.5 fps tubeside velocity is to ensure the coil self-vents properly. There is no minimum waterflow limit for coils that do not
require self venting. See "Water Coil Piping" section for minimum self venting velocities.
(d)
Maximum gpm limits are to prevent erosion and noise problems.
Routine Maintenance