Trane ComfortLink II XL 1040 - Menu Screen

page 4
18-HD88D1-1D-EN
User Guide
Fan Mode
Back
Auto On
Fan will run when the system runs
On
Permanent Hold
Holding Permanently
Heat
to
62
72
6:30 PMSat, Aug 9
62
Cool
to
72
Menu
Off
Permanent Hold
Following Schedule
Fan Running
Screen Off
Indoor Humidity
%
32
75
Fan Mode
On
Outdoor Temp
94
Upstairs
Heating & Cooling
Setpoints:
- Select a setpoint
to modify
- Use the arrows
to increase or
decrease the
highlighted
setpoint
Home Screen
Select the Permanent Hold
button to toggle between On/O
options.
The 1040 System Mode is
bound to the 1050 System
Mode and cannot be modied
from the 1040 zone sensor.
The Fan Mode button allows you to
choose between Auto or On fan modes.
* Auto Fan Mode turns the fan
o and on with the heating and
cooling system operation.
* On Fan Mode runs the fan
continuously. If enabled, the
Smart Continuous Fan feature may
disable fan operation when the
indoor humidity level rises above
the humidity setpoint.
* ON: maintains current temperature setpoint until you manually
change the setpoint.
* OFF: resumes scheduling if enabled. A zone schedule may
be created or modied from the 1050 control’s Schedules &
Presets screen.