Need help?Do you have a question about the Trane Tracer CH530 and is the answer not in the manual?
General| Series | Tracer CH530 |
|---|---|
| Input Voltage | 24 VAC |
| Communication Protocols | BACnet, LonWorks |
| Compatibility | Trane |
| Product Type | Chiller controller |
| Memory | Flash memory for program storage |
| Dimensions | Varies depending on the specific model and enclosure. (Example: Approximately 250mm x 200mm x 100mm) |
| Weight | Varies by configuration |
Highlights the importance of following safety warnings and cautions for personal safety and proper operation.
Essential safety measures during maintenance and service visits, including power disconnection.
Details the screen lock feature, unlock procedure, and password requirements.
Explains the machine operating mode and details specific modes like Stopped and Run Inhibit.
Details circuit-level operating modes including Stopped, Run Inhibit, Auto, and Waiting to Start.
Describes the Reports tab and how to select and view system and circuit-specific reports.
Describes the Settings screen layout for adjusting parameters organized by subsystem.
Explains the operation of Auto, Stop, and Immediate Stop keys for chiller control.
Describes how to access the diagnostics screen via the Alarms enunciator and view active diagnostics.
Details diagnostics for starter failures, phase reversal, dry runs, and phase loss.
Covers diagnostics for power loss, current imbalance, and starter faults.
Details various starter fault types and acceleration issues.
Covers starter interrupt failures, over/under voltage, and motor overload diagnostics.
Details diagnostics for processor resets, unexpected shutdowns, and temperature issues.
To Next Page
