Trane ComfortLink II XL950 Control - Network Security Settings; Configuring SSID and Security Type

21
6) Enter the Network Key using the on-screen
keypad.
5) Press “Enter Network Key” button.
2) Press the “Enter SSID Name” button.1) The “Network Security” button in this Ad-
vanced Network Settings menu will be
highlighted by default.
4) Select a network security type.*
*NOTE: WEP-Shared is not supported.
3) Enter the SSID Name using the on-screen
keypad.
When the network’s SSID is not broadcast (hidden), manual configuration in this screen is required.
Network Security7.5