23
Once a network has been joined, the control will reconnect to it after signal or
power interruptions. When connected, a green dot will be shown.
To disconnect from this network, enter the “Connect to a Network” menu and
select “Disconnect”.
NOTE: When joining a different network, the current router must be discon-
nected in this menu before a new one may be selected. In addition if settings
are changed on the owner’s router, the network may need to be disconnected
and reconnected in this menu.
Repeat previous steps to connect to a different network.
The Network Properties screen displays the control’s current network informa-
tion.
Network Properties
Disconnecting from a Network
7.7
7.8
To Next Page
Loading...
