Trane ComfortLink II XL950 Control - Zone and System Configuration; System Status and Schedule Copying; Renaming Zones and System

25
5) System wide settings
for all zones can be
seen at a glance in the
System Status screen.
8) System and Zone
Names may be set
in the Zone Names
screen. The “Rename
System” and “Rename
Zone” buttons al-
low entering custom
names from a keypad.
Pre-configured names
are also available.
6) A schedule for one
zone can be copied to
another.
7) Each zone’s schedule
can be viewed by cy-
cling through the zones
using the arrows in the
top left corner.