Trane FIAECON003 Series User Manual

August 2022
ACC-SVN232A-EN
0 to 100% Downflow Dry Bulb
Economizer
Packaged Cooling and Gas/Electric
12.5 to 25 Tons
Installation Instructions
Model Number: Used With:
FIAECON003* T/YS*180-300, W/D/GS*150-300
SAFETY WARNING
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of
heating, ventilating, and air-conditioning equipment can be hazardous and requires specific knowledge and training.
Improperly installed, adjusted or altered equipment by an unqualified person could result in death or serious injury.
When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that are
attached to the equipment.

Trane FIAECON003 Series Specifications

General

Brand	Trane
Model	FIAECON003 Series
Category	Chiller
Language	English

Summary

Introduction

Safety Advisories and Precautions

Defines safety advisories (WARNING, CAUTION, NOTICE) and general precautions for safe operation.

Environmental and Refrigerant Practices

Covers environmental concerns regarding ozone layer and guidelines for responsible refrigerant handling.

Electrical and PPE Safety

Details critical requirements for field wiring, grounding, and personal protective equipment (PPE).

General Information

Inspection Procedures

Instructions for unpacking and inspecting all components for shipping damage upon delivery.

Field Installed Option Parts

Lists the major components included for the field installed economizer option.

Factory Installed Option Parts

Lists the components included with the factory installed economizer option.

Installation

General Installation Safety

Emphasizes adherence to all safety precautions listed in the manual and on unit labels.

Field Installed Option Installation

Step-by-step guide for installing the field-configurable economizer.

Factory Installed Option Setup

Instructions for setting up the factory installed economizer option.

Mist Eliminator Servicing

Procedures for removing, cleaning, and reinstalling mist eliminators.

Configuration Settings

Minimum Position Setting

Procedure to adjust and check the economizer minimum position setting.

Dry Bulb Settings

Information on standard economizer dry bulb changeover settings.

Reference Enthalpy Settings

Details on economizer enthalpy changeover settings and configuration.

Wiring Connections

Guidance on electrical connections for the fresh air module.