What does it mean if my Trane IntelliPak shows Low Suction Pressure?
The suction pressure dropped below a pressure threshold. See the Low Suction Pressure Protection specification for further details.
What does it mean if my Trane Air Conditioner displays VFD Supply Fan Motor Current Overload - 1?
The inverter peak current of approximately 200% of rated current was exceeded for 1.5 seconds. This will generate Supply Fan 1 Proving Failure Diagnostic and lockout all heating operation. Also, Supply Fan 1 Proving Failure will be generated to shutdown the unit.
General| Refrigerant | R-410A |
|---|---|
| Compressor Type | Scroll |
| Voltage | 208/230/460V, 3-phase |
| Type | Rooftop Unit |
| Airflow Configuration | Horizontal |
| Sound Level | Varies by model |
| Control System | Tracer |
| Dimensions | Varies with model |
| Weight | Varies with model |
| Heating Capacity | Optional electric or gas |
To Next Page