Trane LCD Control Series User Manual

10
ACYSTAT-IOM-EN
TURBO Mode
TURBO mode rapidly maximizes the cooling capacity in
COOL or DRY mode. With this simply mode, the user can
easily get the maximum cooling capacity and comfort.
- Press MENU button and select TURBO mode setting
by pressing either or .
- The air-conditioner will accelerate capacity up totally
20 minutes or until room temperature is lower than 18
O
C.
- When TURBO mode completely operates or is cancelled,
“TURBO” will be disappeared from the display and
return to the former settings before TURBO mode.
- To cancel TURBO mode, either press MODE button
or select TURBO mode and press MENU button again.
Note:
• The LCD display will not show fan speed and set
temperature.
• Fan speed and set temperature can not be changed while
TURBO mode is selected.
• In case of power failure, TURBO mode will be
automatically cancelled.
SLEEP Mode
SLEEP mode automatically and gradually adjusts room
temperature to provide great comfort during your rest.
Cooling
- Press MENU button and select SLEEP mode by
pressing either or .
- Press MENU button again to confirm SLEEP mode.
will be shown on the display.
- After one hour operation of SLEEP mode, the unit will
automatically raise set temperature by 0.5
O
C.
- After one and half hour operation of SLEEP mode, the
unit will automatically raise set temperature by 0.5
O
C
again and on the display will disappear.
- To cancel SLEEP mode, either press MODE button
or select SLEEP mode and press MENU button again.
Heating
- Press MENU button and select SLEEP mode by
pressing either or .
- Press MENU button again to confirm SLEEP mode.
will be shown on the display.
- After one hour operation of SLEEP mode, the unit will
automatically reduce set temperature by 0.5
O
C.
- After one and half hour operation of SLEEP mode,
the unit will automatically reduce set temperature by
0.5
O
C again and on the display will disappear.
- To cancel SLEEP mode, either press MODE button
or select SLEEP mode and press MENU button again.
Display Unit and Receiver Board
LCD Wired Control
Note:
• Set temperature shown on the display still show the
setting without 1
O
C added/reduced but it will plus/minus
1
O
C in the memory.
• will disappear from the LCD display when SLEEP mode
completely operates, after one and half hours, or is
cancelled.
•
In case of power failure, SLEEP mode will be automatically
cancelled.

Trane LCD Control Series Specifications

General

Brand	Trane
Model	LCD Control Series
Category	Control Systems
Language	English