To Next PageTo Next PageWhat to do if Trane Picco R32-140 unit does not start?
If your Trane Chiller unit isn't starting, begin by verifying the power supply and inspecting the protection systems upstream. Ensure the unit's master switch is set to ON and the circuit breaker is also ON. If these steps don't resolve the issue, the electronic board, contactor, or compressor might be damaged, requiring component replacement.
Why is my Trane Picco R32-140 unit yeld poor?
A poor yield from your Trane Chiller could be due to an insufficient amount of refrigerant or an improperly sized plant system. Checking these aspects is recommended.
General| Refrigerant | R32 |
|---|---|
| Cooling Capacity | 140 kW |
| Compressor Type | Scroll |
| Power Supply | 400V/3Ph/50Hz |
| Type | Air Cooled |
Guidelines for protecting workers' health and safety during operation and maintenance.
Mandatory personal protective equipment for safe operation and maintenance of the unit.
Identification and explanation of safety signs displayed on the unit for hazard awareness.
General principles and precautions for the correct installation of the unit according to regulations.
Specifications for the chemical and physical properties of water required for the unit's hydraulic circuit.
Instructions for connecting the unit to the electrical power supply, including cable specifications and safety.
Procedure for safely powering on and initiating the operation of the unit after installation.
Overview of general maintenance tasks and frequency recommendations for ensuring unit reliability.
Comprehensive technical specifications for the heat pump performance under various operating conditions.
Permitted water flow rates for the evaporator to ensure correct operation and prevent damage.
Description of the user interface display, buttons, and navigation structure for controlling the unit.
