Trane Symbio 700 FIAOPTN001 Series User Manual

SAFETY WARNING
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and air-conditioning equipment
can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered equipment by an unqualified person could result in death or
serious injury. When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that are attached to the equipment.
August 2022
ACC-SVN243A-EN
Installation Guide
Symbio™ 700 Fresh Air Options
Module
Model Number: Used With:
FIAOPTN001* Precedent™ with Symbio™ 700 Controls

Trane Symbio 700 FIAOPTN001 Series Specifications

General

Series	Symbio 700
Model	FIAOPTN001
Category	Control Unit
Compatibility	Trane HVAC Systems
Input Voltage	24 VAC
Operating Temperature Range	-40°F to 158°F (-40°C to 70°C)
Enclosure Rating	IP20
Communication Protocol	BACnet, Modbus
Humidity Range	5% to 95% RH, non-condensing

Summary

Safety Information

General Safety Warning

Advisory for qualified personnel to observe precautions when servicing equipment to prevent death or injury.

Field Wiring and Grounding Safety

Mandates qualified personnel and code adherence for safe electrical installation to prevent hazards.

Personal Protective Equipment (PPE)

Requires technicians to wear appropriate PPE to prevent injury from electrical, mechanical, or chemical hazards.

Environmental, Health, and Safety (EHS) Policies

Instructs personnel to follow company EHS policies for safe work practices, superseding local regulations if more stringent.

Introduction

Important Environmental Concerns

Discusses refrigerants and their potential impact on the earth's stratospheric ozone layer.

Responsible Refrigerant Practices

Outlines requirements for responsible refrigerant handling, recovery, and recycling according to regulations.

General Information and Inspection

Inspection Procedures

Steps for unpacking and visually inspecting kit components for shipping damage upon delivery.

Parts List

Details the components included in the kit, such as the options module, screws, and label.

Installation Instructions

Hazardous Voltage Warning

Critical warning to disconnect all power and follow lockout/tagout procedures before servicing.

Installation Steps

Step-by-step guide for installing the fresh air module, connecting harnesses, and setting switches.