Trane Tracer XM30 - User Manual

Tracer XM30, XM32, XM70, and
XM90 Expansion Modules
Installation, Operation, and Maintenance
March 2020
BAS-SVX46E-EN
SAFETY WARNING
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of
heating, ventilating, and air-conditioning equipment can be hazardous and requires specific knowledge and training.
Improperly installed, adjusted or altered equipment by an unqualified person could result in death or serious injury.
When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that are
attached to the equipment.

Trane Tracer XM30 Specifications

General

Model	Tracer XM30
Type	Control Unit
Series	Tracer
Display	LCD
Power Supply	24 VAC
Input Voltage	20-30 VAC
Enclosure Rating	NEMA 1
Connectivity	Ethernet, BACnet
Communication Protocol	BACnet, LonWorks
Operating Temperature	0 to 50 °C
Humidity Range	10 to 90% RH
Product Type	Building Automation Controller

Summary

Introduction

Proper Field Wiring and Grounding

Emphasizes qualified personnel and adherence to electrical codes for safe wiring and grounding.

Personal Protective Equipment (PPE)

Details mandatory PPE for safe installation and servicing procedures.

Environmental, Health, and Safety (EHS) Policies

Power Budget

Calculating DC Power Consumption

Explains how to calculate DC power consumption for UC400, UC600, and expansion modules.

Expansion Module Power Requirements

XM30 and XM32 Module Power Requirements

Installing the Tracer Expansion Modules

Mounting and Removing Tracer Devices

Provides instructions on mounting and removing expansion modules from a DIN rail.

Setting Rotary Switch Addresses

Explains how to set unique rotary switch addresses for expansion modules.

IMC Communication and Power Wiring

AC Power Warnings and Notices

Provides critical warnings and notices related to AC power installation and safety.

Terminal Wiring Requirements

Details wire lengths, types, and installation practices for terminal wiring.

Transformer Requirements

Wiring AC Power to the XM70;90

Provides step-by-step instructions for wiring AC power to the XM70/90 modules.

Configuring the Expansion Modules

Guides users on configuring expansion modules using the Tracer TU service tool.

Remote Mounting

Expansion Module Operation

Troubleshooting Communication

Addresses issues where points referencing expansion modules are in fault or not controlling.

Status Errors

Expansion Module Errors

Commissioning and Troubleshooting in a Powered State

Resistive Inputs

Provides checkout procedures and expected values for testing resistive inputs.

Voltage Inputs

Current Inputs

Current Input Method 2

Binary Inputs: 24 Vac Detect

Binary Inputs: Based on Analog Output Connection

Voltage Analog Output

Current Analog Output