Trane Tracer XM70 User Manual

Tracer XM30, XM32, XM70, and
XM90 Expansion Modules
Installation, Operation, and Maintenance
March 2020
BAS-SVX46E-EN
SAFETY WARNING
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of
heating, ventilating, and air-conditioning equipment can be hazardous and requires specific knowledge and training.
Improperly installed, adjusted or altered equipment by an unqualified person could result in death or serious injury.
When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that are
attached to the equipment.

Trane Tracer XM70 Specifications

General

Brand	Trane
Model	Tracer XM70
Category	Control Unit
Language	English

Summary

Introduction

Safety Advisories and Notices

Defines safety advisories including warnings, cautions, and notices for safe operation.

Field Wiring and Grounding Requirements

Emphasizes requirements for safe field wiring and grounding to prevent hazards.

Personal Protective Equipment (PPE)

Details required Personal Protective Equipment for technicians to prevent injury during installation and servicing.

EHS Policy Compliance

Required Tools for Mounting and Wiring

Power Budget

Calculating DC Power Consumption

Explains how to calculate DC power requirements for expansion modules and controllers.

UC400 and XM70/XM90 Power Requirements

XM30/XM32 Power Requirements

Installing the Tracer Expansion Modules

Mounting and Removing Devices

Setting Rotary Switch Addresses

Explains the process of setting unique rotary switch addresses for each expansion module.

IMC Communication and Power Wiring

Describes methods for connecting communication and power wiring for expansion modules via IMC terminals.

Wiring AC Power to XM70/90

Provides step-by-step instructions for safely wiring AC power to the XM70/90 expansion modules.

Module Configuration

AC Power Warnings and Notices

Terminal Wiring Requirements

Transformer Requirements

Troubleshooting

Communication Issues

Status Errors

Commissioning and Troubleshooting in a Powered State