Trane Tracer XM90 User Manual

Tracer XM30, XM32, XM70, and
XM90 Expansion Modules
Installation, Operation, and Maintenance
March 2020
BAS-SVX46E-EN
SAFETY WARNING
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of
heating, ventilating, and air-conditioning equipment can be hazardous and requires specific knowledge and training.
Improperly installed, adjusted or altered equipment by an unqualified person could result in death or serious injury.
When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that are
attached to the equipment.

Trane Tracer XM90 Specifications

General

Brand	Trane
Model	Tracer XM90
Category	Control Unit
Language	English

Summary

Introduction and Safety

Safety Advisories and Notices

Defines different types of safety advisories and their meanings.

Personal Protective Equipment (PPE) Requirements

Details required PPE for safe installation and servicing.

EHS Policies and Compliance

Outlines company EHS policies for personnel and local regulations.

Installing the Tracer Expansion Modules

Mounting and Removing Tracer Devices

Provides instructions for mounting/removing modules on a DIN rail.

Installation Procedures

Setting Rotary Switch Addresses

Details how to set unique rotary switch addresses for modules.

AC Power and Wiring Requirements

AC Power Warnings and Notices

Highlights hazardous voltage and grounding requirements.

AC Power Wiring and Configuration

Wiring AC Power to XM70/90

Provides step-by-step instructions for wiring AC power to modules.

Expansion Module Operation and Troubleshooting

Communication Troubleshooting

Describes problems with module communication and their solutions.

Status Errors Troubleshooting

Explains error messages in Tracer TU and their causes.

Troubleshooting Module Errors

Duplicate Rotary Switch Settings Error

Addresses errors from duplicate rotary switch settings.

Device Not Configured Error

Addresses errors when a device is discovered but not configured.

Wrong Hardware Part Number Error

Addresses errors related to incorrect hardware part numbers.

Module Not Found Error

Addresses errors when a configured module is not found.