10
18-GJ06D2-2A
2. Disconnect the two wiring connections routed to the blower
assembly.
3. Slide Blower assembly out of unit using built-in blower support
channels and set aside.
Wiring
Connecti ons
Blower Support
Channel
4. Remove airflow diverter from the bottom of coil drain pan by
gripping the plastic diverter while using your thumbs to spread
the top of the diverter slightly outwards and then pulling down
and out through the blower opening as illustrated.
OOppttiioonnaall CCaabbiinneett DDiissaasssseemmbbllyy
To Next Page
Loading...
