How to calibrate indoor temperature display on Trane TCONT900AC43UA?
If the indoor temperature display on your Trane Control Panel is incorrect, the temperature display might need calibration using ISU 0700.
What to do if heat or cool is on but no air is coming from Trane registers?
If your Trane Control Panel displays Heat ON or Cool ON, but there's no air coming from the registers: * Wait one minute after Heat ON is displayed, then check the registers, as the heating equipment might turn on the fan when the furnace has warmed up. * Check the heating and/or cooling equipment to ensure it's operating correctly.
Why outdoor temperature is not displayed on Trane TCONT900AC43UA?
If the outdoor temperature display on your Trane Control Panel shows “--” or isn't displaying, check the following: * The outdoor temperature sensor might be open, shorted, not reporting, or not installed. Replace or install the outdoor sensor. * The outdoor sensor field wiring might be open or shorted. Check and repair the outdoor sensor field wiring.
What to do if Trane TCONT900AC43UA Control Panel does not respond to keypad screen presses?
If your Trane Control Panel isn't responding to keypad presses: * Check if the keys are locked; if “Screen Locked” is displayed, unlock the keypad using ISU 0670. * The control might need replacement due to keypad failure.
Why does the fan run all the time on my Trane TCONT900AC43UA?
If the fan is constantly running on your Trane Control Panel, here are a few things to check: * The fan mode might be set to ON - continuous. Change the fan mode to AUTO or CIRC. * The fan might be scheduled to run continuously. Reprogram the fan schedule if desired. * The indoor equipment may need service. Check the indoor equipment.
How to fix temperature setting if it will not change on Trane TCONT900AC43UA Control Panel?
If you cannot adjust the temperature settings on your Trane Control Panel, consider these possibilities: * You may have reached the upper or lower temperature limits. Check the heating limits (ISU 0600), which are between 40°F - 90°F (4.4°C - 32.2°C), and the cooling limits (ISU 0610), which are between 60°F - 99°F (15.5°C - 32.2°C). * The keys may be fully locked, with “Screen Locked” displayed on the LCD. If so, unlock the keypad using ISU 0670.
Why is the cooling not coming on with my Trane TCONT900AC43UA?
If your Trane Control Panel is not activating the cooling, here's what to check: * Make sure the System Mode is set to Cool and lower the setpoint below the room temperature. * If cooling doesn't start within 15 minutes, examine the cooling equipment. * Inspect and fix any loose connections to the control or system. * The cooling system might need professional repair.
Why is the heating not coming on with my Trane Control Panel?
If your Trane Control Panel is not turning on the heat, consider the following: * Ensure the System Mode is set to Heat and that the setpoint is raised above the room temperature. * If the heating doesn't start within 5 minutes, inspect the heating equipment. * Check and repair any loose connections to the control or system. * The heating system may require professional repair.
General| Compatibility | Compatible with most HVAC systems |
|---|---|
| Display | Touchscreen |
| Wi-Fi Enabled | Yes |
| Programmable | Yes |
| Energy Star Certified | Yes |
| Connectivity | Wi-Fi |
| Remote Access | Yes |
| Indoor Humidity Control | Yes |
| Energy Monitoring | Yes |
| Backlight | Yes |
| Mounting | Wall-mounted |
| Series | 900 |
| Power Source | 24V |
| Stages | Up to 2 Heat, 2 Cool |
Explains the function of various keys and display elements on the thermostat's home screen.
Describes how to select fan modes (On, Auto, Circ) and system modes (Heat, Cool, Auto, Off).
Explains how to temporarily or permanently override the programmed schedule with specific temperature settings.
Details on setting humidification levels and managing frost control features for optimal indoor comfort.
Instructions for setting the current year, month, and day for accurate timekeeping and scheduling.
Guides through various setup options, including calendar, time, schedule, fan, humidity, and display settings.
To Next Page
