19
User settings are accessed by pressing the MENU button on the main
screen.
User Settings
Set Clock
Filter Service
Maint Service
Screen Timeout
F/C Settings
Sensor Calibration
Internal
Remote 1*
Remote 2*
Outside*
Backlite/Display
Usage Graph
ESM Setpoints
Zwave Install
Thermostat Info
NOTES:
* TZEMT500 Only
Select
Menu Select Button
Done Back one level or to exit
Current selection on thermostat
Installer settings are accessed by pressing the MENU button on the
main screen then pressing and holding the two middle buttons until
the Installer Settings appear.
Installer Settings (Hidden)
Display Lock
System Settings
Mechanical Settings
Type
Fan Type
C/O Type
2nd Stage Heat
Aux Heat
2nd Stage Cool
Sched Enable
Recovery Enable
H/C Delta
H Delta Stg1 ON
H Delta Stg1 OFF
H Delta Stg2 ON
H Delta Stg2 OFF
H Delta AuxH ON
H Delta AuxH OFF
C Delta Stg1 ON
C Delta Stg2 OFF
C Delta Stg2 ON
C Delta Stg2 OFF
Max Heat SP
Max Cool SP
Min Run Time
Min Off Time
Fan Cycler
Fan ON Time
Fan OFF Time
Remote Sensors *
RS2 Location *
Restore Defaults
Schedules (Disabled by Default
Heat and Cool
Preset: Comfort
Preset: Energy Star
Copy (small c on each schedule screen)
Menu Maps
To Next Page
Loading...
