Trane TZON1050AC52ZAA - Z-Wave Settings and Other Features; Association Group Information Table; Z-Wave Terminology and Information; Quiet Mode Operation

page 30 XL1050 User Guide
Advanced Z-Wave Settings
Quiet Mode
Quiet Mode limits compressor operation
(heating and cooling mode) to minimum speed
from 10 p.m. to 9 a.m. This is to support local
noise ordinances in the upper northwest and
other regions.
Characteristics of Quiet Mode
• For use with Trane’s TruComfort™ variable
speed systems.
• During heating mode, indoor heat is
allowed if the system cannot maintain
space conditions while Quiet Mode is active
• Quiet Mode is only available for VSPD
systems using a 1050 control
• Quiet Mode is disabled by default. To
enable, from the home screen press
SYSTEM MODE, then select SYSTEM
OPTIONS and then ENABLE.
• When active, Quiet will be displayed
below the indoor temperature on the
XL1050 home screen
Other Features
Terminology
The following terms may be used interchangeably by other
devices, manufacturers, and Nexia.
ADD Add, include, inclusion, enroll, connect
REMOVE Remove, exclude, exclusion
COPY Copy, learn, replicate, replication
Other Information
• Basic Command Class:
This device ignores Basic Set/Get
commands.
Association Group Information Table
Group Prole
Command Class
and Command
List
Group
Name
Max
Number of
Devices
Trigger
1
General:
Lifeline
Device Reset
Locally
Notication
Lifeline 5 Factory Reset