34 BAS-SVX40B-EN
Appendix: Using the Tracer™ TU Service Tool with Wireless Networks
Remove Device From Network
Select to remove the WCI and its associated unit controller to whichTracerTU is currently
connected from the wireless network.
Disband Network
Select to disband the network.TracerTU must be attached to the network coordinator.
Join Network
Select to join the network. (Appears when you are connecting to a member WCI. It is grayed out
if you have already joined the network.)
Create Network
Select to create a new network in which the attached device will be network coordinator. (Similar
to START button onWCI.)Typically, used for a unit controller that will be network coordinator when
noTracer SC is present.
Advanced
Opens the Advanced tab shown in Figure 24.
Figure 24. Advanced tab
To Next Page
Loading...
