Need help?Do you have a question about the Trane BCI-I and is the answer not in the manual?
General| Frequency Response | 20 Hz to 20 kHz |
|---|---|
| Signal-to-Noise Ratio | 90 dB |
| Power Supply | 12V DC |
| Dimensions | 8.5 x 6 x 1.75 inches |
| Weight | 2.2 lbs |
Details connecting Tracer TU to the BCI-I device via USB for configuration and diagnostics.
Provides steps to reset the BCI-I controller to its factory default unconfigured state.
Explains the function, behavior, and troubleshooting tips for the BCI-I's LEDs.
Introduces tables listing data points and diagnostic points for equipment objects.
Lists Analog Output object identifiers, names, descriptions, units, and valid ranges.
Lists Analog Input object identifiers, names, descriptions, and units for the BCI-I.
Details the Analog Value object, specifically the Filter Runtime Hours Setpoint.
Lists Multistate Output objects, their names, descriptions, and possible states.
Details Multistate Input objects, including unit types and economizer/condenser descriptions.
Lists Binary Output objects, their names, descriptions, and relinquish defaults.
Lists Binary Input objects for system control, compressor status, and unit status.
Introduces diagnostic data points identified as Binary Inputs.
Provides a sorted list of all object types, names, and descriptions for the BCI-I.
Introduces diagnostic objects sorted by name, showing value ranges and descriptions.
To Next Page
