ACC-SVP01B-EN • BCI-I Integration Guide 17
BACnet Data Points and Configuration Property Definitions
BACnet Data Points and Configuration Property
Definitions
The BCI device allows an IntelliPak control system to communicate with BACnet systems and
devices using BACnet MS/TP. This section includes information about:
• BACnet protocol implementation conformance statement (PICS)
• Object types: descriptions and configuration (refer to Table 2, p. 19)
• BACnet protocol: data link layers, device address binding, networking options, and character
sets
• Object data points and configurations
BACnet Protocol Implementation Conformance Statement (PICS)
Standardized Device Profile (Annex L)
Interoperability Building Blocks (Annex K)
Profile Description Supported Profile
BACnet Advanced Application Controller (B-AAC)
BACnet Application Specific Controller (B-ASC)
9
BACnet Building Controller (B-BC)
BACnet Operator Workstation (B-OWS)
BACnet Smart Actuator (B-SA)
BACnet Smart Sensor (B-SS)
Data Sharing Description Supported BIBB
Data Sharing-COV-B (DS-COV-B)
Data Sharing-ReadProperty-A (DS-RP-A)
9
Data Sharing-ReadProperty-B (DS-RP-B)
9
Data Sharing-ReadPropertyMultiple-B (DS-RPM-B)
9
Data Sharing-WriteProperty-A (DS-WP-A)
9
Data Sharing-WriteProperty-B (DS-WP-B)
9
Data Sharing-WritePropertyMultiple-B (DS-WPM-B)
9
Alarm and Event Management Description Supported BIBB
Alarm and Event-ACKI-B (AE-ACK-B)
9
Alarm and Event-Alarm Summary-B (AE-ASUM-B)
9
Alarm and Event-Enrollment Summary-B (AE-ESUM-B)
9
Alarm and Event-Information-B (AE-INFO-B)
9
Alarm and Event-Notification Internal-B (AE-N-I-B)
9
To Next Page
Loading...
Need help?
General
