SYSTEM
SET-UP
Let’s say you prefer military time on your
LCD clock. Or you’d rather see the temperature
in Celsius degrees. Or you think the temperature
reading needs adjusting. Or you just feel like
going beyond the basics.
•While holding down EXIT, press
OUTDOOR TEMP. Hold both keys
simultaneously until System Set-Up
appears in the upper left corner of
the LCD. (This will take approximately
three seconds.)
Now the Home Comfort Sensor will begin to
talk to you. Watch for messages where the clock
is normally displayed.
•The first Set-Up is the time format. If
you operate on a 24-hour clock and you
don’t have to think twice to remember
that 1500 hours means 3:00 p.m., this
one’s for you. When the letters hr
appear, press either ARROW to toggle
between 12 and 24 to choose the
number of hours on your clock.
Getting Really Fancy.
14
To Next Page
Loading...
